Frame rates for documentary: 23.976, 24, 25, 30 and 60 explained
What frame rate means, why 23.976 exists, when to shoot 24, 25, 30 or 60 fps, how to avoid flicker, and how to mix rates in the edit and meet delivery specs. Some links here are affiliate links.

In this piece (9 parts)
On a two-camera shoot in East Vancouver a few winters back, the second camera arrived set to 25 frames per second, left over from a job abroad. Nobody checked. The interview looked fine on both monitors, and it was only in the edit that every cut to the B camera carried a faint stutter, a hitch in each hand gesture, because the software was quietly throwing away one frame in every twenty-five. A frame rate is one menu setting. Getting it wrong costs days.
This guide covers what frame rate means, where the odd numbers come from, which rate suits which job, how to keep mains-powered lights from flickering, and what happens when rates meet in the edit.
What frame rate means
Frame rate is the number of separate still pictures a camera records each second, written as fps (frames per second) or with a p for progressive, as in 24p. Played back at the same speed, those pictures blend into motion. A higher frame rate gives smoother, more detailed movement. A lower one gives more motion blur in each frame and the slightly dreamy cadence people call the film look.
Frame rate works hand in hand with shutter speed, which is how long each frame is exposed. The long-standing habit is a shutter open for half the frame interval, the 180-degree shutter: 1/48 of a second at 24 fps, 1/50 at 25, 1/60 at 30. The shutter angle calculator converts between angles and speeds for any rate.
24 and 23.976
Twenty-four frames per second has been the cinema standard since sound arrived at the end of the 1920s, a speed settled on with the soundtrack in mind. Most of what we think of as filmic motion is simply 24 fps with a 180-degree shutter.
The 23.976 figure is a television inheritance. North American television ran at 30 frames (60 interlaced fields) a second, tied to 60 Hz mains power. When colour arrived in the early 1950s, engineers lowered the rate by about one part in a thousand, to 30000/1001 or about 29.97, so that the new colour signal would not interfere with the sound. Film transferred to that system played at 24000/1001, about 23.976, and the number has outlived the technology that created it. Cameras set to a 60 Hz system often label it 24p or 23.98p; some also offer a true 24.00, so read the menu.
The two look identical and are not interchangeable. The difference is 0.1 percent, which means a sound file running at one rate and pictures at the other drift apart by a frame roughly every 42 seconds, and by 3.6 seconds over an hour. Set every camera and the sound recorder's timecode to the same rate before the first take.
25 in 50 Hz countries
Most of Europe, Africa, Asia and Australia run on 50 Hz power, and their television grew up at 25 frames (50 fields) a second, the PAL and SECAM world. Shoot 25 with a 1/50 shutter under that mains power and lights stay steady. If your film is commissioned by a European broadcaster, 25 is almost certainly the rate they will ask for.
There is an old side effect worth knowing. For decades, feature films shown on 50 Hz television were simply run at 25 instead of 24, about 4 percent fast. Running times shrank, and unless the sound was corrected, voices rose slightly in pitch.
29.97 and 30
The 29.97 rate is the home of North American broadcast, and much online video sits at 29.97 or 30. Motion looks a touch smoother than at 24, closer to news and live television. Plenty of documentaries shot for Canadian and American television are made at 29.97, and plenty are made at 23.976; the choice is partly technical and partly about how you want movement to feel.
Because 29.97 is not a whole number, its timecode needs a correction. Drop-frame timecode skips the frame labels 00 and 01 at the start of every minute, except every tenth minute, so that the timecode keeps pace with the clock on the wall. No pictures are thrown away, only numbers. Non-drop timecode at 29.97 falls about 3.6 seconds behind real time every hour. The timecode calculator handles both, and it is the quickest way to check a running time against a broadcaster's slot.
Phones need special care. Many record at a variable frame rate that hovers around 30, which editing software can mishandle, drifting out of sync over a long clip. Convert phone footage to a constant rate before you cut.
50 and 60 for motion and slow motion
Rates of 50, 59.94 and 60 capture fast movement cleanly: sport, dance, a crowd surging, a pan across a busy street. Their bigger use in documentary is slow motion. Conform 59.94 footage into a 23.976 timeline and it plays at 40 percent speed, two and a half times slower. 50 into 25 gives exactly half speed, and 120 into 24 gives one fifth.
Choose the high rate that belongs to the same family as your project: 50 for a 25 fps film, 59.94 for 23.976 or 29.97. Mixing families makes slow motion awkward and flicker more likely.
Matching mains frequency to avoid flicker
Lights on mains power pulse at twice the mains frequency: 120 times a second in Canada and the United States, 100 times in 50 Hz countries. If the shutter stays open for a whole number of those pulses, the pulsing averages out. If it does not, household LEDs, fluorescent tubes and some dimmed fixtures will flicker or roll. The table gives settings that line up with the pulses.
| Frame rate | Where it comes from | Typical use | Shutter under 60 Hz power | Shutter under 50 Hz power |
|---|---|---|---|---|
| 23.976 | Film on 60 Hz television | North American film-style docs | 1/60 (about 144°) | 1/50 (about 173°) |
| 24 | Cinema since sound | Cinema and DCP | 1/60 (144°) | 1/50 (172.8°) |
| 25 | 50 Hz television | Europe, Australia, much of Asia and Africa | 1/60 (150°) | 1/50 (180°) |
| 29.97 or 30 | 60 Hz television | North American broadcast, online | 1/60 (180°) | 1/50 (216°) |
| 50 | 50 Hz television | Motion, slow motion into 25 | 1/120 (150°) | 1/100 (180°) |
| 59.94 or 60 | 60 Hz television | Motion, slow motion into 23.976 or 29.97 | 1/120 (180°) | 1/100 (216°) |
Notice that 24 fps with a 180-degree shutter (1/48) is not on the safe list in either case. Indoors under mains lights, I shoot 23.976 at 1/60 and nobody has ever noticed the slightly crisper motion. The guide to the interview lighting kit covers the flicker that dimmable LED fixtures add on top of that.
Conforming and mixing rates in the edit
Pick the project rate before the shoot and tell everyone: the second camera, the drone operator, the person shooting behind the scenes on a phone, the sound recordist setting timecode. Write it on the call sheet.
In the edit you can treat a clip at a different rate in two ways. Conforming tells the software to play every recorded frame at the timeline rate, which is how high-rate footage becomes slow motion, and how 25 fps material slows by 4 percent to fit 24, with the audio dropping in pitch unless you correct it. Leaving the clip at real speed makes the software drop or repeat frames to keep time, so a 29.97 clip in a 23.976 timeline loses frames and stutters on pans and gestures. Frame blending and optical flow can smooth that, often with smeared edges on moving hands.
Archive brings its own rates. Silent film was often cranked at speeds below 24, and not always steadily, while old video arrives interlaced at 50 or 59.94 fields a second, which needs careful deinterlacing. The guide to archive footage and rights covers getting the material; budget time to get the motion right as well.
Delivery specs
Read the delivery specification before you shoot, not after the picture lock. Broadcasters publish technical requirements that list the frame rates they accept, and changing rate after the fact, between 25 and 29.97 for example, is a standards conversion that costs time and some quality. In North America expect the 29.97 family, often with 23.976 accepted; in most of Europe, expect 25.
For cinema, a DCP is normally made at 24 fps, so a 23.976 project is sped up by that tenth of a percent when the DCP is made and the sound follows along. For online platforms, upload at the rate you edited. They handle 24, 25, 30, 50 and 60 without complaint, and a conversion on the way out only adds judder.
Questions
What is frame rate?
Frame rate is the number of individual images recorded or shown each second, written as fps. Common rates are 23.976, 24, 25, 29.97, 30, 50 and 60. Higher rates give smoother motion; lower rates give more motion blur per frame.
Is 23.976 the same as 24 fps?
No. 23.976 is 24000/1001, a rate inherited from North American colour television, and it runs 0.1 percent slower than 24. They look alike, but sound and picture drift if you mix them.
Should I shoot documentary at 24 or 30 fps?
Either works. 23.976 gives the familiar cinematic motion; 29.97 or 30 looks smoother and closer to television news. Check your broadcaster's delivery spec first, and use 25 if the film is for a 50 Hz country.
What frame rate do I need for slow motion?
Shoot at a multiple of your project rate and conform it in the edit: 59.94 into 23.976 gives 40 percent speed, 50 into 25 gives half speed, and 120 into 24 gives one fifth speed.
Can I mix frame rates in one edit?
You can, but every clip at a different rate is either conformed, which changes its speed, or converted, which drops or repeats frames. Set one project rate for every camera before the shoot.


